# S001; Cedar Rapids 2036 Factory Portable Jaw Crusher S/N 15867, jaw dies 90% one is 30%.  No brakes on trailer.  It has to be hauled.  Apron Feeder has had repairs done to it.   The machine is in very good working condition.  Good under-conveyor, no power on crusher.


# R002; Hewitt-Robins 54"X36" Impact Crusher & feeder, S/N 20-7203, triple 14" rollers, Siemens 15hp 3 ph mtr, A.C. 200hp 3 ph motor, 5 axle, 9.00-20 tires.


# R102; Cedar Rapids 36" Portable Impactor S/N 16090(Secondary) on tandem carrier with receiving hopper, no conveyor, no power.


# R300; Telsmith 36" Std Bare Cone Crusher S/N 6226. 


# R301; Allis Chalmers Cone Crusher S/N 9471 on stand suitable for operation, pump & main drive motor are included, feed size up to 5, might be an "R" Series.


# R302; Trio 30X42 Jaw Crusher, (2003) CT Series, S/N CT3042-208 hydraulically adjusted.


# R411; Universal 61X85 Stationary Impact Crusher, s/n 613X6, many extra parts, new side liners, bearing housings, used motor & shaft assembly that could be rebuilt, date manufactured 1969, 300 hp motor required, 1200 RPM, 400-632 RPM rotor speed, 53" hammer circle, 7-1/2" shaft size at bearing, 8-1/2" at rotor, 3 bars in rotor, discharge size 80% 1-1/2" minus.


# R420; Universal 44X48 Jaw Crusher, S/N 132X4, WRB Roller Bearing Jaw Crusher, 200 HP, 225 RPM, new bearings.  Stationary dies 90%, movable dies replaced by 4" T-1 plate, with new wedges & bolts, 1 -1/2" manganese rounds welded on plates with pattern to match stationary dies.  Entire eccentric has been disassembled & checked thoroughly with new bearings installed.


# R502; Mo Rogers 38X50 Impactor, 1967, S/N 3850-PD-PP-240, 8V71 Detroit Power, with 36" X 18' Apron Feeder.


# R509; Universal 54"X30" Twin Roll Crusher, S/N 218X79 & 80, like new shells, do not need built up, roll incomplete, needs rubber tire and wheels installed, needs drive mechanism, such as speed reducer, or gear head motor, pinion and pull gear not good


# R517; Eagle 40" Hammermill on skid with Allis Chalmers 4X12 (2) Deck Incline Screen, has 40" mill, 20 x 24 opening, ripple flo


# R607; Allis Chalmers, Crusher, Gyratory Cone, 30", Manufactured in 1940, model 15, s/n 9057, Discharge at 5", MFG. in 1940's, weight 70 ton


# R622; Universal 36" Twin Impact Crusher without feeder & hopper, V12-71 Detroit engine. 

$20,000.  "AS-IS"

# R700; Cedar Rapids 555 Portable Crushing Plant S/N 24096, 12X36 Jaw, 3030 Rolls, 4X14 Screen, cat engine on plant, front dolley, feeder with hopper, portable return conveyor with switch gear... $55,000 Complete.     Or as separate components: Feeder....$8,  Jaw....$22,500,  Roll....$6,  Port Screen....$14,  Engine....$10,

$55,000. "Complete"

# R702; Remco 9500 Impact Crusher, VSI, main frame worn, operational at shut down


# R706; Superior 42X40 Jaw Crusher, S/N 1148, blake type. One piece main frame, approximately 80 tons total. Superior was bought out by Allis Chalmers. Allis Chalmers continued to make this crusher for many years after changing the name.


# R829; Trio 30X42 Jaw Crusher, NEW, S/N 3042-263.

$ P.O.R.